捕鱼达人官网直营注册开户 高端人性化风机制造商-广东聚富风机

High end humanized fan manufacturer-Jufu Fan
0769-81818561136-0230-8561

捕鱼达人官网直营注册开户

专注品牌终端产品陈列、POP展示架、展示柜设计定制加工

捕鱼达人官网直营官网平台
tongfengxingyefengji

捕鱼达人官网直营官网平台(Centrifugal fan for ventilation industry)返回

  • 产品介绍

、性能参数

风量范围:2655~83650m3/h。

风压范围:520~2360 Pa。

传动方向:皮带式(C)。

方向角度:可制成顺时针或逆时针,均可制成0°,45°,90°,135°,180°,225°,270°,315°种角度。

二、用途

此风机分为后倾式及S型风叶,叶片宽大,流线型设计不易造成堵塞。广泛用于无尘车间送风,车间送风,烤炉断热,纺织机械,窑炉设备,定型机或涂布机设备排风,各大厦通风,工业排气等行业送风或排风。

特别说明:

进风口可制作成:方形及圆形。

轴承座:连体式,分体式。

请定期给风机加注相应高温型润滑油。

排气风机请计算系统阻力,无尘房安装多台风机时请相互保持距离或隔离处理,以免发生抢风现象,造成性能减弱。

Performance parameters:

Air volume range: 2655 ~ 83650m3/h.

Wind pressure range: 520-2360 Pa.

Driving direction: belt type (C).

Direction angle: it can be made clockwise or anticlockwise, and can be made into eight angles: 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °, 315 °.


Application:

The fan is divided into backward inclined and S-shaped blades. The blades are wide and the streamline design is not easy to cause blockage. It is widely used for air supply or exhaust in dust-free workshops, workshops, ovens, textile machinery, kiln equipment, sizing machines or coating machines, buildings, industrial exhaust and other industries.

Special instructions:

The air inlet can be made into square and round.

Bearing pedestal: integral type, split type.

Please fill the fan with corresponding high-temperature lubricating oil regularly.

Please calculate the system resistance of the exhaust fan. When installing multiple fans in the dust-free room, please keep a distance from each other or isolate them, so as to avoid the phenomenon of wind rushing and weakening the performance.